56029398AA compatible for Dodge Ram 4500HD 2012-2013 Tire Pressure Monitoring Sensors 4x
Introduction
The air fuel ratio sensor is installed in the exhaust manifold or in the front exhaust pipe, before the catalytic converter. The job of the air fuel ratio sensor is to measure the oxygen content in the exhaust and provide feedback to the engine computer PCM so that it can add or subtract fuel. Maxpeedingrods oxygen sensors are designed with high quality materials that ensure improved performance and long lasting durability to boost the optimum capacity of your car and improve the fuel efficiency of the vehicle. Maxpeedingrods provide quality Air Fuel Ratio Sensors which compatible for Chrysler, compatible for Dodge, compatible for Fiat ,Compatible for Jeep and compatible for Mitsubishi series.
Application
Compatible for Chrysler 300 2012-2015 W/Rubber Stem Snap-in Sensor\
compatible for Chrysler 300 2011\
compatible for Chrysler Town & Country Van 2011-2015\
compatible for Dodge Challenger 2010-2015 W/Rubber Stem Snap-in Sensor\
compatible for Dodge Charger 2012-2015\
compatible for Dodge Charger 2010-2011 W/Rubber Stem Snap-in Sensor\
compatible for Dodge Durango 2011-2015\
compatible for Dodge Grand Caravan 2011-2015\
compatible for Dodge Journey 2011-2015\
compatible for Dodge Ram 4500HD 2012-2013\
compatible for Dodge Ram 5500HD 2012-2013\
compatible for Dodge Ram Series Pickup 2012-2013\
compatible for Dodge Ram Series Pickup 2010-2011 W/Rubber Stem Snap-in Sensor\
compatible for Fiat 500 2012-2015\
compatible for Jeep Grand Cherokee; 2011-2015\
compatible for Jeep Wrangler 2013-2014 (433 MHZ only)、\
Compatible for Mitsubishi Lancer; 2013-2011; W/Alloy Wheels\
compatible for Mitsubishi Outlander; 2013-2011; W/Alloy Wheels
Specification
Part number\
56029398AB，\
56029398AA，\
68142397AA\
68241067AB,\
SU14361\
5S1294\
4250B668\
4313057L00\
68241067AA\
Color：Black\
Frequency: 433 MHz\
Package Include: \
4 x Tire Pressure Monitoring Sensors\
Condition: 100% brand new\
Warranty: one year warranty for any manufacturing defect
Features
- 100% brand new 4 Pcs Tire Pressure Sensor.\
- Made of high quality material, ensuring high durability for long time use.\
- Professional manufacturing, high accuracy and reliability.\
- High level of accuracy and sensitivity, enhance safety of your vehicle.\
- Fit both the front wheels and the rear wheels, left and right sides
Notice
- Please calibrate your Sensor after install.\
- The sensors were not coming with any nuts or bolts.\
- No instruction included; Installation of TPMS is recommended to be performed only by trained professionals.\
- Please confirm your original part number or oem numbr can match up with one of the part numbers above.\
- Please check our store for other auto parts you may be interested in.\
- For any needs please contact us.
Installation Process
1. Loosen the tire: Remove the valve cap and core and deflate the tire.\
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.\
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.\
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.\
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.