Aftermarket Turbo Street Type Billet Compressor Wheel Turbocharger 0.57 A/R 0.5 A/R For 2.5L-3.5L engine Oil Cooled
Introduction
We know you want to be the best both on the track and off. Whether you're a diehard racer or just looking to boost your daily driver's performance, Maxpeedingrods street performance turbo turbocharger has what you need. For exceptional power and unbeatable technology, Maxpeedingrods can help you find the perfect turbocharger for your unique setup.
Application
Compatible For 1.5L to 2.5L any 4/6 cylinder engine
Specification
Turbine Intake Flange: T3 T4 4 bolt Flange Patterns
Turbine Exhaust Flange: Standard T3 5 bolt flange pattern
Wastegate: External Wastegate
Maximum PSI 19（1.3Bar）
Compressor Trim: 48.1
Compressor A/R: 0.5
Compressor Inducer: 52.7mm
Compressor Exducer: 76mm
Turbine Trim: 74.2
Turbine A/R: 0.57
Turbine Inducer: 64.8mm
Turbine Exducer: 55.8mm
Turbine exhaust inlet: 45mm/87mm
Compressor outlet: 42mm(inside diameter)、52mm(Outer diameter)
Compressor inlet: 68 mm(inside diameter)、77mm(Outer diameter)
Cooling Type: Oil Cooled
Bearing Type: Floating Bearing/Journal Bearing
Trust Bearing: 270 degree
Horsepower: Up to 400+HP
Condition: Brand New
Package Size:26x 24x 23 cm
Package Weight: 7250g
Features
*Product Material
1. Turbine housing: Silicon-Molybdenum - temperature resistant up to 850℃
2. Steel Turbine Wheel: K419 alloy - high oxidation stability and resistance up to 1000℃
3. Compressor housing: ZL104 aluminium with lightweight
4. Compressor wheel/blades: Aluminum blades-precision machining forging and lightweight design
*Product Performance
1. Cost-effective turbo increase 20-40% power for your car
2. Excellent high-temperature resistance，high efficiency and durability
3. Rich experience in turbo production and own factory
4. High-Speed oil seal ring and Precision clearance
*Product Certification
TÜV ISO 9001 CERTIFIED
* Technology Advantage:
1. 100% balancing Test by TURBO TECHNICS VSR3
2. G3-min-Flow VNT Turbo testing
3. Advanced Actuator Tester/Programmer
Notice
* Does NOT have an internal wastegate so you must have an external wastegate on your manifold.
* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.
* Make sure the oil drain line is lower than the turbo itself.
* Ensure exhaust outlets are well sealed by welding
* Professional installation is highly recommended.
* This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order.
* Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated (e.g. insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc.)!
\